dmesg - 2012-01-06 21:30
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-toi-zcache-snappy-05154-g45f1f7d (root@deneb) (gcc version 4.6.2 (Debian 4.6.2-9) ) #1 SMP PREEMPT Thu Jan 5 23:32:35 CET 2012
[ 0.000000] Disabled fast string operations
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f680000 (usable)
[ 0.000000] BIOS-e820: 000000003f680000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] DMI present.
[ 0.000000] DMI: Acer Aspire 5710Z /Acadia, BIOS V1.50 07/17/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x3f680 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 03F700000 mask FFFF00000 uncachable
[ 0.000000] 2 base 03F800000 mask FFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] original variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1015MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[ 0.000000] total RAM covered: 1015M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 16M num_reg: 3 lose cover RAM: 0G
[ 0.000000] New variable MTRRs
[ 0.000000] reg 0, base: 0GB, range: 1GB, type WB
[ 0.000000] reg 1, base: 1015MB, range: 1MB, type UC
[ 0.000000] reg 2, base: 1016MB, range: 8MB, type UC
[ 0.000000] found SMP MP-table at [c00f6d60] f6d60
[ 0.000000] initial memory mapped : 0 - 01c00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
[ 0.000000] RAMDISK: 36b74000 - 375b2000
[ 0.000000] ACPI: RSDP 000f6cb0 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 3f6849b4 00084 (v01 ACRSYS ACRPRDCT 06040000 LTP 00000000)
[ 0.000000] ACPI: APIC 3f68bbf6 00068 (v01 Acer Acadia 06040000 LOHR 0000005A)
[ 0.000000] ACPI: HPET 3f68bc5e 00038 (v01 Acer Acadia 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 3f68bc96 0003C (v01 Acer Acadia 06040000 LOHR 0000005A)
[ 0.000000] ACPI: SLIC 3f68bcd2 00176 (v01 ACRSYS ACRPRDCT 06040000 LOHR 00000000)
[ 0.000000] ACPI: DBGP 3f68be48 00034 (v01 Acer Acadia 06040000 LOHR 00000000)
[ 0.000000] ACPI: FACP 3f68be7c 000F4 (v03 Acer Acadia 06040000 LOHR 00000001)
[ 0.000000] ACPI: DSDT 3f685c9c 05EE6 (v01 Acer CALISTGA 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 3f68cfc0 00040
[ 0.000000] ACPI: APIC 3f68bf70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 3f68bfd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SSDT 3f685a92 0020A (v01 SataRe SataAhci 00001000 INTL 20050228)
[ 0.000000] ACPI: SSDT 3f684faa 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 3f684f04 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050228)
[ 0.000000] ACPI: SSDT 3f684a38 004CC (v01 PmRef CpuPm 00003000 INTL 20050228)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003f680
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003f680
[ 0.000000] On node 0 totalpages: 259599
[ 0.000000] free_area_init_node: node 0, pgdat c15a0b80, node_mem_map f6384200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 254 pages used for memmap
[ 0.000000] HighMem zone: 32132 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:a0000000)
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 13 pages/cpu @f5c00000 s29952 r0 d23296 u2097152
[ 0.000000] pcpu-alloc: s29952 r0 d23296 u2097152 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 257569
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.2.0-toi-zcache-snappy-05154-g45f1f7d root=/dev/sda6 ro quiet i8042.nomux i8042.reset splash init=/bin/systemd pcie_aspm=force zcache=lzf
[ 0.000000] PCIe ASPM is forcibly enabled
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 4155136 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003f680)
[ 0.000000] Memory: 1007948k/1038848k available (3764k kernel code, 30448k reserved, 2027k data, 372k init, 129544k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc15a9000 - 0xc1606000 ( 372 kB)
[ 0.000000] .data : 0xc13ad183 - 0xc15a8100 (2027 kB)
[ 0.000000] .text : 0xc1000000 - 0xc13ad183 (3764 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU debugfs-based tracing is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f580a000 soft=f580c000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1862.054 MHz processor.
[ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3724.10 BogoMIPS (lpj=1862054)
[ 0.001007] pid_max: default: 32768 minimum: 301
[ 0.001040] Security Framework initialized
[ 0.001061] Mount-cache hash table entries: 512
[ 0.001230] Initializing cgroup subsys debug
[ 0.001233] Initializing cgroup subsys cpuacct
[ 0.001240] Initializing cgroup subsys memory
[ 0.001249] Initializing cgroup subsys devices
[ 0.001252] Initializing cgroup subsys freezer
[ 0.001255] Initializing cgroup subsys blkio
[ 0.001284] Disabled fast string operations
[ 0.001290] CPU: Physical Processor ID: 0
[ 0.001292] CPU: Processor Core ID: 0
[ 0.001295] mce: CPU supports 6 MCE banks
[ 0.001306] CPU0: Thermal monitoring enabled (TM1)
[ 0.001312] using mwait in idle threads.
[ 0.002038] ACPI: Core revision 20110623
[ 0.007072] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.007538] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.017747] CPU0: Genuine Intel(R) CPU T2130 @ 1.86GHz stepping 0c
[ 0.017998] Performance Events: Core events, core PMU driver.
[ 0.017998] ... version: 1
[ 0.017998] ... bit width: 40
[ 0.017998] ... generic registers: 2
[ 0.017998] ... value mask: 000000ffffffffff
[ 0.017998] ... max period: 000000007fffffff
[ 0.017998] ... fixed-purpose events: 0
[ 0.017998] ... event mask: 0000000000000003
[ 0.029020] CPU 1 irqstacks, hard=f5896000 soft=f58a0000
[ 0.029023] Booting Node 0, Processors #1 Ok.
[ 0.029026] smpboot cpu 1: start_ip = 9b000
[ 0.001999] Initializing CPU#1
[ 0.001999] Disabled fast string operations
[ 0.101015] Brought up 2 CPUs
[ 0.101019] Total of 2 processors activated (7447.96 BogoMIPS).
[ 0.102056] devtmpfs: initialized
[ 0.102154] PM: Registering ACPI NVS region at 3f680000 (524288 bytes)
[ 0.102360] print_constraints: dummy:
[ 0.102360] NET: Registered protocol family 16
[ 0.103032] ACPI: bus type pci registered
[ 0.103059] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.103059] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.103059] PCI: Using MMCONFIG for extended config space
[ 0.103059] PCI: Using configuration type 1 for base access
[ 0.108043] bio: create slab at 0
[ 0.108061] ACPI: Added _OSI(Module Device)
[ 0.108061] ACPI: Added _OSI(Processor Device)
[ 0.108061] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.108061] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.110102] ACPI: EC: Look up EC in DSDT
[ 0.113216] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.113848] ACPI: SSDT 3f685750 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.114216] ACPI: Dynamic OEM Table Load:
[ 0.114220] ACPI: SSDT (null) 0027A (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
[ 0.114373] ACPI: SSDT 3f685209 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.114713] ACPI: Dynamic OEM Table Load:
[ 0.114717] ACPI: SSDT (null) 004C2 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
[ 0.114983] ACPI: SSDT 3f6859ca 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.115345] ACPI: Dynamic OEM Table Load:
[ 0.115349] ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
[ 0.115455] ACPI: SSDT 3f6856cb 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.115796] ACPI: Dynamic OEM Table Load:
[ 0.115800] ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
[ 0.116157] ACPI: Interpreter enabled
[ 0.116169] ACPI: (supports S0 S3 S4 S5)
[ 0.116189] ACPI: Using IOAPIC for interrupt routing
[ 0.127036] ACPI: EC: GPE storm detected, transactions will use polling mode
[ 0.191110] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.191192] ACPI: No dock devices found.
[ 0.191200] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.191513] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.192568] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.192572] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.192575] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.192579] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
[ 0.192583] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
[ 0.192586] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
[ 0.192591] pci_root PNP0A08:00: host bridge window [mem 0x40000000-0xfebfffff] (ignored)
[ 0.192606] pci 0000:00:00.0: [8086:27a0] type 0 class 0x000600
[ 0.192656] pci 0000:00:02.0: [8086:27a2] type 0 class 0x000300
[ 0.192670] pci 0000:00:02.0: reg 10: [mem 0xd0300000-0xd037ffff]
[ 0.192678] pci 0000:00:02.0: reg 14: [io 0x5088-0x508f]
[ 0.192686] pci 0000:00:02.0: reg 18: [mem 0xc0000000-0xcfffffff pref]
[ 0.192694] pci 0000:00:02.0: reg 1c: [mem 0xd0400000-0xd043ffff]
[ 0.192735] pci 0000:00:02.1: [8086:27a6] type 0 class 0x000380
[ 0.192746] pci 0000:00:02.1: reg 10: [mem 0xd0380000-0xd03fffff]
[ 0.192854] pci 0000:00:1b.0: [8086:27d8] type 0 class 0x000403
[ 0.192878] pci 0000:00:1b.0: reg 10: [mem 0xd0440000-0xd0443fff 64bit]
[ 0.193023] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.193029] pci 0000:00:1b.0: PME# disabled
[ 0.193058] pci 0000:00:1c.0: [8086:27d0] type 1 class 0x000604
[ 0.193148] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.193153] pci 0000:00:1c.0: PME# disabled
[ 0.193187] pci 0000:00:1c.2: [8086:27d4] type 1 class 0x000604
[ 0.193276] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.193282] pci 0000:00:1c.2: PME# disabled
[ 0.193313] pci 0000:00:1c.3: [8086:27d6] type 1 class 0x000604
[ 0.193402] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.193408] pci 0000:00:1c.3: PME# disabled
[ 0.193439] pci 0000:00:1d.0: [8086:27c8] type 0 class 0x000c03
[ 0.193498] pci 0000:00:1d.0: reg 20: [io 0x50a0-0x50bf]
[ 0.193540] pci 0000:00:1d.1: [8086:27c9] type 0 class 0x000c03
[ 0.193598] pci 0000:00:1d.1: reg 20: [io 0x50c0-0x50df]
[ 0.193639] pci 0000:00:1d.2: [8086:27ca] type 0 class 0x000c03
[ 0.193697] pci 0000:00:1d.2: reg 20: [io 0x50e0-0x50ff]
[ 0.193741] pci 0000:00:1d.3: [8086:27cb] type 0 class 0x000c03
[ 0.193799] pci 0000:00:1d.3: reg 20: [io 0x5400-0x541f]
[ 0.193853] pci 0000:00:1d.7: [8086:27cc] type 0 class 0x000c03
[ 0.193879] pci 0000:00:1d.7: reg 10: [mem 0xd0644000-0xd06443ff]
[ 0.193972] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.194024] pci 0000:00:1d.7: PME# disabled
[ 0.194049] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
[ 0.194139] pci 0000:00:1f.0: [8086:27b9] type 0 class 0x000601
[ 0.194255] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.194263] pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
[ 0.194270] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff20 (mask 000f)
[ 0.194276] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
[ 0.194320] pci 0000:00:1f.1: [8086:27df] type 0 class 0x000101
[ 0.194338] pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
[ 0.194351] pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
[ 0.194364] pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
[ 0.194377] pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
[ 0.194390] pci 0000:00:1f.1: reg 20: [io 0x5090-0x509f]
[ 0.194440] pci 0000:00:1f.2: [8086:27c5] type 0 class 0x000106
[ 0.194466] pci 0000:00:1f.2: reg 10: [io 0x5478-0x547f]
[ 0.194479] pci 0000:00:1f.2: reg 14: [io 0x5470-0x5473]
[ 0.194492] pci 0000:00:1f.2: reg 18: [io 0x5468-0x546f]
[ 0.194505] pci 0000:00:1f.2: reg 1c: [io 0x545c-0x545f]
[ 0.194518] pci 0000:00:1f.2: reg 20: [io 0x5440-0x544f]
[ 0.194531] pci 0000:00:1f.2: reg 24: [mem 0xd0644400-0xd06447ff]
[ 0.194575] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.194580] pci 0000:00:1f.2: PME# disabled
[ 0.194602] pci 0000:00:1f.3: [8086:27da] type 0 class 0x000c05
[ 0.194678] pci 0000:00:1f.3: reg 20: [io 0x5420-0x543f]
[ 0.194787] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.194897] pci 0000:04:00.0: [14e4:1693] type 0 class 0x000200
[ 0.194930] pci 0000:04:00.0: reg 10: [mem 0xd0000000-0xd000ffff 64bit]
[ 0.195080] pci 0000:04:00.0: PME# supported from D3hot D3cold
[ 0.195087] pci 0000:04:00.0: PME# disabled
[ 0.197001] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.197011] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.197107] pci 0000:05:00.0: [168c:001c] type 0 class 0x000200
[ 0.197140] pci 0000:05:00.0: reg 10: [mem 0xd0100000-0xd010ffff 64bit]
[ 0.198997] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.199006] pci 0000:00:1c.3: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.199062] pci 0000:06:00.0: [1524:0730] type 0 class 0x000501
[ 0.199088] pci 0000:06:00.0: reg 10: [mem 0xd0200000-0xd020007f]
[ 0.199189] pci 0000:06:00.0: supports D1 D2
[ 0.199191] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.199198] pci 0000:06:00.0: PME# disabled
[ 0.199223] pci 0000:06:00.1: [1524:0750] type 0 class 0x000805
[ 0.199249] pci 0000:06:00.1: reg 10: [mem 0xd0200400-0xd02004ff]
[ 0.199347] pci 0000:06:00.1: supports D1 D2
[ 0.199350] pci 0000:06:00.1: PME# supported from D0 D1 D2 D3hot
[ 0.199356] pci 0000:06:00.1: PME# disabled
[ 0.199381] pci 0000:06:00.2: [1524:0720] type 0 class 0x000501
[ 0.199407] pci 0000:06:00.2: reg 10: [mem 0xd0200800-0xd020087f]
[ 0.199506] pci 0000:06:00.2: supports D1 D2
[ 0.199509] pci 0000:06:00.2: PME# supported from D0 D1 D2 D3hot
[ 0.199515] pci 0000:06:00.2: PME# disabled
[ 0.199539] pci 0000:06:00.3: [1524:0751] type 0 class 0x000501
[ 0.199565] pci 0000:06:00.3: reg 10: [mem 0x00000000-0x000000ff]
[ 0.199664] pci 0000:06:00.3: supports D1 D2
[ 0.199667] pci 0000:06:00.3: PME# supported from D0 D1 D2 D3hot
[ 0.199673] pci 0000:06:00.3: PME# disabled
[ 0.199749] pci 0000:00:1e.0: PCI bridge to [bus 06-06] (subtractive decode)
[ 0.199758] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.199767] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.199771] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.199800] pci_bus 0000:00: on NUMA node 0
[ 0.199804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.199998] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.200054] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.200110] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.200183] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.200234] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x0f)
[ 0.205069] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 5 *6 10 12 14 15)
[ 0.205129] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 5 6 *11 12 14 15)
[ 0.205182] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 5 6 10 12 14 15) *11
[ 0.205235] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 5 6 11 12 14 15) *10
[ 0.205288] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 5 6 *10 12 14 15)
[ 0.205341] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 5 6 11 12 14 15) *0, disabled.
[ 0.205394] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 5 6 *10 12 14 15)
[ 0.205446] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 *5 6 11 12 14 15)
[ 0.205485] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.205485] vgaarb: loaded
[ 0.205485] vgaarb: bridge control possible 0000:00:02.0
[ 0.206068] SCSI subsystem initialized
[ 0.206068] libata version 3.00 loaded.
[ 0.207033] wmi: Mapper loaded
[ 0.207033] PCI: Using ACPI for IRQ routing
[ 0.218901] PCI: pci_cache_line_size set to 64 bytes
[ 0.219022] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.219026] reserve RAM buffer: 000000003f680000 - 000000003fffffff
[ 0.219103] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.219103] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.220996] Switching to clocksource hpet
[ 0.224923] pnp: PnP ACPI init
[ 0.224946] ACPI: bus type pnp registered
[ 0.225341] pnp 00:00: [bus 00-ff]
[ 0.225347] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.225350] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.225353] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.225357] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.225360] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.225363] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.225367] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.225370] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.225373] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.225376] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.225379] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.225382] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.225385] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.225388] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.225392] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.225395] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.225398] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.225401] pnp 00:00: [mem 0x40000000-0xfebfffff window]
[ 0.225405] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.225556] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.225571] pnp 00:01: [mem 0xe0000000-0xefffffff]
[ 0.225578] pnp 00:01: [mem 0xfed14000-0xfed17fff]
[ 0.225581] pnp 00:01: [mem 0xfed18000-0xfed18fff]
[ 0.225584] pnp 00:01: [mem 0xfed19000-0xfed19fff]
[ 0.225587] pnp 00:01: [mem 0xfed1c000-0xfed1ffff]
[ 0.225589] pnp 00:01: [mem 0xfed20000-0xfed3ffff]
[ 0.225709] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.225713] system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
[ 0.225716] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.225720] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.225724] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.225728] system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.225732] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.264034] pnp 00:02: [io 0x0000-0x001f]
[ 0.264038] pnp 00:02: [io 0x0081-0x0091]
[ 0.264040] pnp 00:02: [io 0x0093-0x009f]
[ 0.264043] pnp 00:02: [io 0x00c0-0x00df]
[ 0.264046] pnp 00:02: [dma 4]
[ 0.264162] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.264175] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 0.264273] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.264353] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 0.264482] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.264488] system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.264501] pnp 00:05: [io 0x00f0]
[ 0.264516] pnp 00:05: [irq 13]
[ 0.264620] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.264651] pnp 00:06: [io 0x002e-0x002f]
[ 0.264654] pnp 00:06: [io 0x004e-0x004f]
[ 0.264657] pnp 00:06: [io 0x0061]
[ 0.264659] pnp 00:06: [io 0x0063]
[ 0.264662] pnp 00:06: [io 0x0065]
[ 0.264664] pnp 00:06: [io 0x0067]
[ 0.264667] pnp 00:06: [io 0x0070]
[ 0.264669] pnp 00:06: [io 0x0080]
[ 0.264672] pnp 00:06: [io 0x0092]
[ 0.264674] pnp 00:06: [io 0x00b2-0x00b3]
[ 0.264677] pnp 00:06: [io 0x0800-0x080f]
[ 0.264680] pnp 00:06: [io 0x1000-0x107f]
[ 0.264683] pnp 00:06: [io 0x1180-0x11bf]
[ 0.264685] pnp 00:06: [io 0x1640-0x164f]
[ 0.264688] pnp 00:06: [io 0xfe00-0xfefe]
[ 0.264691] pnp 00:06: [io 0xff2c-0xff2f]
[ 0.264827] system 00:06: [io 0x0800-0x080f] has been reserved
[ 0.264831] system 00:06: [io 0x1000-0x107f] has been reserved
[ 0.264835] system 00:06: [io 0x1180-0x11bf] has been reserved
[ 0.264838] system 00:06: [io 0x1640-0x164f] has been reserved
[ 0.264842] system 00:06: [io 0xfe00-0xfefe] has been reserved
[ 0.264846] system 00:06: [io 0xff2c-0xff2f] has been reserved
[ 0.264850] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.264862] pnp 00:07: [io 0x0070-0x0077]
[ 0.264869] pnp 00:07: [irq 8]
[ 0.264977] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.265032] pnp 00:08: [io 0x0060]
[ 0.265035] pnp 00:08: [io 0x0064]
[ 0.265042] pnp 00:08: [irq 1]
[ 0.265160] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.265231] pnp 00:09: [irq 12]
[ 0.265335] pnp 00:09: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.265402] pnp: PnP ACPI: found 10 devices
[ 0.265405] ACPI: ACPI bus type pnp unregistered
[ 0.307082] PCI: max bus depth: 1 pci_try_num: 2
[ 0.307145] pci 0000:00:1c.3: BAR 9: assigned [mem 0x40000000-0x401fffff 64bit pref]
[ 0.307151] pci 0000:00:1c.3: BAR 7: assigned [io 0x2000-0x2fff]
[ 0.307155] pci 0000:00:1c.2: BAR 9: assigned [mem 0x40200000-0x403fffff 64bit pref]
[ 0.307160] pci 0000:00:1c.2: BAR 7: assigned [io 0x3000-0x3fff]
[ 0.307164] pci 0000:00:1c.0: BAR 8: assigned [mem 0x40400000-0x405fffff]
[ 0.307169] pci 0000:00:1c.0: BAR 9: assigned [mem 0x40600000-0x407fffff 64bit pref]
[ 0.307173] pci 0000:00:1c.0: BAR 7: assigned [io 0x4000-0x4fff]
[ 0.307177] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
[ 0.307182] pci 0000:00:1c.0: bridge window [io 0x4000-0x4fff]
[ 0.307189] pci 0000:00:1c.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.307196] pci 0000:00:1c.0: bridge window [mem 0x40600000-0x407fffff 64bit pref]
[ 0.307205] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
[ 0.307209] pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
[ 0.307217] pci 0000:00:1c.2: bridge window [mem 0xd0000000-0xd00fffff]
[ 0.307223] pci 0000:00:1c.2: bridge window [mem 0x40200000-0x403fffff 64bit pref]
[ 0.307232] pci 0000:00:1c.3: PCI bridge to [bus 05-05]
[ 0.307237] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
[ 0.307244] pci 0000:00:1c.3: bridge window [mem 0xd0100000-0xd01fffff]
[ 0.307250] pci 0000:00:1c.3: bridge window [mem 0x40000000-0x401fffff 64bit pref]
[ 0.307260] pci 0000:06:00.3: BAR 0: assigned [mem 0xd0200100-0xd02001ff]
[ 0.307269] pci 0000:06:00.3: BAR 0: set to [mem 0xd0200100-0xd02001ff] (PCI address [0xd0200100-0xd02001ff])
[ 0.307272] pci 0000:00:1e.0: PCI bridge to [bus 06-06]
[ 0.307280] pci 0000:00:1e.0: bridge window [mem 0xd0200000-0xd02fffff]
[ 0.307299] pci 0000:00:1c.0: enabling device (0100 -> 0103)
[ 0.307321] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.307330] pci 0000:00:1c.0: setting latency timer to 64
[ 0.307343] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.307349] pci 0000:00:1c.2: setting latency timer to 64
[ 0.307364] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.307370] pci 0000:00:1c.3: setting latency timer to 64
[ 0.307377] pci 0000:00:1e.0: enabling device (0004 -> 0006)
[ 0.307384] pci 0000:00:1e.0: setting latency timer to 64
[ 0.307389] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.307393] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.307396] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
[ 0.307399] pci_bus 0000:02: resource 1 [mem 0x40400000-0x405fffff]
[ 0.307403] pci_bus 0000:02: resource 2 [mem 0x40600000-0x407fffff 64bit pref]
[ 0.307406] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
[ 0.307409] pci_bus 0000:04: resource 1 [mem 0xd0000000-0xd00fffff]
[ 0.307413] pci_bus 0000:04: resource 2 [mem 0x40200000-0x403fffff 64bit pref]
[ 0.307416] pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
[ 0.307419] pci_bus 0000:05: resource 1 [mem 0xd0100000-0xd01fffff]
[ 0.307423] pci_bus 0000:05: resource 2 [mem 0x40000000-0x401fffff 64bit pref]
[ 0.307426] pci_bus 0000:06: resource 1 [mem 0xd0200000-0xd02fffff]
[ 0.307430] pci_bus 0000:06: resource 4 [io 0x0000-0xffff]
[ 0.307433] pci_bus 0000:06: resource 5 [mem 0x00000000-0xffffffff]
[ 0.307484] NET: Registered protocol family 2
[ 0.307558] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.307828] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.308595] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.308979] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.308983] TCP reno registered
[ 0.308989] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.309035] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.309174] NET: Registered protocol family 1
[ 0.309197] pci 0000:00:02.0: Boot video device
[ 0.309340] PCI: CLS mismatch (64 != 32), using 64 bytes
[ 0.309427] Unpacking initramfs...
[ 0.451575] Freeing initrd memory: 10488k freed
[ 0.459530] Simple Boot Flag at 0x36 set to 0x1
[ 0.461122] audit: initializing netlink socket (disabled)
[ 0.461140] type=2000 audit(1325891016.460:1): initialized
[ 0.464336] highmem bounce pool size: 64 pages
[ 0.474819] VFS: Disk quotas dquot_6.5.2
[ 0.474953] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.476640] Btrfs loaded
[ 0.476647] msgmni has been set to 1736
[ 0.477644] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 0.477686] io scheduler noop registered
[ 0.477689] io scheduler deadline registered
[ 0.477702] io scheduler cfq registered (default)
[ 0.477864] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.477997] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.478142] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.478496] intel_idle: MWAIT substates: 0x1110
[ 0.478499] intel_idle: does not run on family 6 model 14
[ 0.478622] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.478669] ACPI: Lid Switch [LID]
[ 0.478782] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 0.478787] ACPI: Sleep Button [SLPB]
[ 0.478899] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.478903] ACPI: Power Button [PWRB]
[ 0.479048] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.479053] ACPI: Power Button [PWRF]
[ 0.506113] acpi device:05: registered as cooling_device0
[ 0.506258] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 0.506264] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.584706] Linux agpgart interface v0.103
[ 0.584765] agpgart-intel 0000:00:00.0: Intel 945GM Chipset
[ 0.584818] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 0.585190] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 0.585431] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 0.585581] [drm] Initialized drm 1.1.0 20060810
[ 0.585620] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.585626] i915 0000:00:02.0: setting latency timer to 64
[ 0.587699] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.587703] [drm] Driver supports precise vblank timestamp query.
[ 0.587783] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.641613] fixme: max PWM is zero.
[ 0.911242] [drm] initialized overlay support
[ 1.074744] fbcon: inteldrmfb (fb0) is primary device
[ 1.318934] Console: switching to colour frame buffer device 160x50
[ 1.324418] fb0: inteldrmfb frame buffer device
[ 1.324420] drm: registered panic notifier
[ 1.324435] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 1.325038] ahci 0000:00:1f.2: version 3.0
[ 1.325057] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.325150] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
[ 1.325155] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.325162] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.326247] scsi0 : ahci
[ 1.326460] scsi1 : ahci
[ 1.326651] scsi2 : ahci
[ 1.326842] scsi3 : ahci
[ 1.327095] ata1: SATA max UDMA/133 abar m1024@0xd0644400 port 0xd0644500 irq 19
[ 1.327098] ata2: DUMMY
[ 1.327100] ata3: DUMMY
[ 1.327102] ata4: DUMMY
[ 1.327498] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.347561] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.347600] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.347907] mousedev: PS/2 mouse device common for all mice
[ 1.347980] I2O subsystem v1.325
[ 1.347982] i2o: max drivers = 8
[ 1.351109] cpuidle: using governor ladder
[ 1.351112] cpuidle: using governor menu
[ 1.351115] zram: num_devices not specified. Using default: 1
[ 1.351118] zram: Creating 1 devices ...
[ 1.351392] zcache: using lzf compressor
[ 1.351521] zcache: cleancache enabled using kernel transcendent memory and compression buddies
[ 1.351525] zcache: frontswap enabled using kernel transcendent memory and xvmalloc
[ 1.351772] TCP cubic registered
[ 1.351774] Initializing XFRM netlink socket
[ 1.351785] NET: Registered protocol family 17
[ 1.351795] Registering the dns_resolver key type
[ 1.351819] Using IPI No-Shortcut mode
[ 1.351827] TuxOnIce 3.2 ()
[ 1.352197] Scanning swap devices for TuxOnIce signature...
[ 1.352201] TuxOnIce scan: No image found.
[ 1.374247] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.460026] Refined TSC clocksource calibration: 1861.999 MHz.
[ 1.460032] Switching to clocksource tsc
[ 1.787036] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.787612] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.216756] ata1.00: ATA-7: TOSHIBA MK1237GSX, DL150J, max UDMA/100
[ 2.216760] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.217653] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.217850] ata1.00: configured for UDMA/100
[ 2.218022] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL15 PQ: 0 ANSI: 5
[ 2.218310] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.218397] sd 0:0:0:0: [sda] Write Protect is off
[ 2.218401] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.218432] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.218446] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.286799] sda: sda1 sda2 sda3 < sda5 sda6 > sda4
[ 2.287662] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.287671] Scanning swap devices for TuxOnIce signature...
[ 2.358294] - Trying 8:5.
[ 2.359814] TuxOnIce scan: No image found.
[ 2.360069] TuxOnIce: No image found.
[ 2.362426] registered taskstats version 1
[ 2.365611] Freeing unused kernel memory: 372k freed
[ 2.365844] Write protecting the kernel text: 3768k
[ 2.365882] Write protecting the kernel read-only data: 1784k
[ 2.458912] udevd[1204]: starting version 175
[ 2.529164] usbcore: registered new interface driver usbfs
[ 2.529204] usbcore: registered new interface driver hub
[ 2.534130] usbcore: registered new device driver usb
[ 2.534933] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.534996] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.535040] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 2.535046] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.535091] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 2.535121] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 2.535136] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.548648] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 2.548683] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0644000
[ 2.551619] tg3.c:v3.121 (November 2, 2011)
[ 2.551642] tg3 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 2.551656] tg3 0000:04:00.0: setting latency timer to 64
[ 2.563377] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.563424] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.563584] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.563587] usb usb1: Product: EHCI Host Controller
[ 2.563590] usb usb1: Manufacturer: Linux 3.2.0-toi-zcache-snappy-05154-g45f1f7d ehci_hcd
[ 2.563594] usb usb1: SerialNumber: 0000:00:1d.7
[ 2.567185] hub 1-0:1.0: USB hub found
[ 2.567194] hub 1-0:1.0: 8 ports detected
[ 2.567333] ata_piix 0000:00:1f.1: version 2.13
[ 2.567357] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.567421] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 2.568634] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.571028] scsi4 : ata_piix
[ 2.572513] sdhci: Secure Digital Host Controller Interface driver
[ 2.572517] sdhci: Copyright(c) Pierre Ossman
[ 2.572833] sdhci-pci 0000:06:00.1: SDHCI controller found [1524:0750] (rev 0)
[ 2.572841] sdhci-pci 0000:06:00.1: found 1 slot(s)
[ 2.572851] sdhci-pci 0000:06:00.1: enabling device (0000 -> 0002)
[ 2.572876] sdhci-pci 0000:06:00.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.572906] sdhci [sdhci_add_host()]: Disabling DMA as it is marked broken
[ 2.572909] sdhci [sdhci_add_host()]: mmc0: Auto-CMD23 unavailable
[ 2.572934] mmc0: no vmmc regulator found
[ 2.572940] sdhci: =========== REGISTER DUMP (mmc0)===========
[ 2.572945] sdhci: Sys addr: 0x00000000 | Version: 0x00000100
[ 2.572951] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 2.572956] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 2.572961] sdhci: Present: 0x01f20000 | Host ctl: 0x00000000
[ 2.572966] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[ 2.572972] sdhci: Wake-up: 0x00000000 | Clock: 0x00000000
[ 2.572977] sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
[ 2.572982] sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003
[ 2.572987] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 2.572993] sdhci: Caps: 0x01e021a1 | Caps_1: 0x00000000
[ 2.572998] sdhci: Cmd: 0x00000000 | Max curr: 0x000000ff
[ 2.573043] scsi5 : ata_piix
[ 2.573501] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x5090 irq 14
[ 2.573506] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x5098 irq 15
[ 2.573713] ata6: port disabled--ignoring
[ 2.573778] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 2.573790] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.573795] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.573812] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.573852] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000050a0
[ 2.573903] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.573906] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.573909] usb usb2: Product: UHCI Host Controller
[ 2.573912] usb usb2: Manufacturer: Linux 3.2.0-toi-zcache-snappy-05154-g45f1f7d uhci_hcd
[ 2.573916] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.575302] hub 2-0:1.0: USB hub found
[ 2.575310] hub 2-0:1.0: 2 ports detected
[ 2.575426] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 2.575438] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 2.575443] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.575458] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 2.575495] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000050c0
[ 2.575540] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.575544] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.575547] usb usb3: Product: UHCI Host Controller
[ 2.575550] usb usb3: Manufacturer: Linux 3.2.0-toi-zcache-snappy-05154-g45f1f7d uhci_hcd
[ 2.575553] usb usb3: SerialNumber: 0000:00:1d.1
[ 2.575733] hub 3-0:1.0: USB hub found
[ 2.575738] hub 3-0:1.0: 2 ports detected
[ 2.575831] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.575842] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 2.575847] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.575857] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 2.575908] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000050e0
[ 2.575954] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.575958] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.575961] usb usb4: Product: UHCI Host Controller
[ 2.575964] usb usb4: Manufacturer: Linux 3.2.0-toi-zcache-snappy-05154-g45f1f7d uhci_hcd
[ 2.575967] usb usb4: SerialNumber: 0000:00:1d.2
[ 2.578074] hub 4-0:1.0: USB hub found
[ 2.578083] hub 4-0:1.0: 2 ports detected
[ 2.578209] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 2.578224] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 2.578229] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.578241] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 2.578281] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005400
[ 2.578336] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.578340] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.578343] usb usb5: Product: UHCI Host Controller
[ 2.578346] usb usb5: Manufacturer: Linux 3.2.0-toi-zcache-snappy-05154-g45f1f7d uhci_hcd
[ 2.578349] usb usb5: SerialNumber: 0000:00:1d.3
[ 2.578522] hub 5-0:1.0: USB hub found
[ 2.578528] hub 5-0:1.0: 2 ports detected
[ 2.582236] sdhci: Host ctl2: 0x00000000
[ 2.582240] sdhci: ===========================================
[ 2.582287] Registered led device: mmc0::
[ 2.582322] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.587416] mmc0: SDHCI controller on PCI [0000:06:00.1] using PIO
[ 2.587424] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 2.587432] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.587472] sdhci-pci 0000:06:00.3: SDHCI controller found [1524:0751] (rev 0)
[ 2.587479] sdhci-pci 0000:06:00.3: found 1 slot(s)
[ 2.587491] sdhci-pci 0000:06:00.3: enabling device (0000 -> 0002)
[ 2.587504] sdhci-pci 0000:06:00.3: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 2.587541] sdhci [sdhci_add_host()]: Disabling DMA as it is marked broken
[ 2.587545] sdhci [sdhci_add_host()]: mmc1: Auto-CMD23 unavailable
[ 2.587558] mmc1: no vmmc regulator found
[ 2.587564] sdhci: =========== REGISTER DUMP (mmc1)===========
[ 2.587569] sdhci: Sys addr: 0x00000000 | Version: 0x00000100
[ 2.587575] sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000
[ 2.587580] sdhci: Argument: 0x00000000 | Trn mode: 0x00000000
[ 2.587585] sdhci: Present: 0x01f20000 | Host ctl: 0x00000000
[ 2.587590] sdhci: Power: 0x00000000 | Blk gap: 0x00000000
[ 2.587595] sdhci: Wake-up: 0x00000000 | Clock: 0x00000000
[ 2.587601] sdhci: Timeout: 0x00000000 | Int stat: 0x00000000
[ 2.587606] sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003
[ 2.587611] sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000
[ 2.587616] sdhci: Caps: 0x01e021a1 | Caps_1: 0x00000000
[ 2.587622] sdhci: Cmd: 0x00000000 | Max curr: 0x000000ff
[ 2.587625] sdhci: Host ctl2: 0x00000000
[ 2.587627] sdhci: ===========================================
[ 2.587674] Registered led device: mmc1::
[ 2.587706] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.589028] mmc1: SDHCI controller on PCI [0000:06:00.3] using PIO
[ 2.598047] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.610021] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 2.610046] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.610053] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 2.610066] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.610073] mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.612014] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 2.612034] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.614027] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.616044] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 2.616066] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.616073] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 2.616086] mmc0: req failed (CMD5): -123, retrying...
[ 2.616097] mmc0: req failed (CMD5): -123, retrying...
[ 2.616108] mmc0: req failed (CMD5): -123, retrying...
[ 2.616120] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.616127] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.616139] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.616145] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.616158] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.616163] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.616176] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.616181] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.616194] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.616200] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.616210] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 2.616223] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.616230] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.618011] mmc0: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 2.618016] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.629018] mmc0: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.641029] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 2.641052] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.641059] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 2.641072] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.641079] mmc0: clock 300000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.643060] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 2.643082] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.645014] mmc0: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.647032] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 2.647051] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.647057] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 2.647070] mmc0: req failed (CMD5): -123, retrying...
[ 2.647081] mmc0: req failed (CMD5): -123, retrying...
[ 2.647093] mmc0: req failed (CMD5): -123, retrying...
[ 2.647104] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.647111] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.647125] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.647130] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.647143] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.647148] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.647161] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.647166] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.647180] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.647186] mmc0: clock 300000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.647195] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 2.647208] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.647215] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.649030] mmc0: mmc_rescan_try_freq: trying to init card at 200000 Hz
[ 2.649037] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.660024] mmc0: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.663481] tg3 0000:04:00.0: eth0: Tigon3 [partno(BCM95787m) rev b002] (PCI Express) MAC address 00:1b:38:28:64:1a
[ 2.663487] tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
[ 2.663492] tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 2.663496] tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 2.672022] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 2.672046] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.672053] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 2.672066] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.672073] mmc0: clock 200000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.674067] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 2.674086] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.676033] mmc0: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.678058] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 2.678093] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.678146] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 2.678161] mmc0: req failed (CMD5): -123, retrying...
[ 2.678172] mmc0: req failed (CMD5): -123, retrying...
[ 2.678183] mmc0: req failed (CMD5): -123, retrying...
[ 2.678194] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.678202] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.678215] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.678220] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.678234] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.678239] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.678252] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.678257] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.678270] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.678277] mmc0: clock 200000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.678286] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 2.678299] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.678306] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.680021] mmc0: mmc_rescan_try_freq: trying to init card at 128906 Hz
[ 2.680026] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.691030] mmc0: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.703025] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 2.703047] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.703054] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 2.703067] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.703074] mmc0: clock 128906Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.705015] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 2.705033] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.707024] mmc0: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.709013] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 2.709032] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.709039] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 2.709052] mmc0: req failed (CMD5): -123, retrying...
[ 2.709063] mmc0: req failed (CMD5): -123, retrying...
[ 2.709074] mmc0: req failed (CMD5): -123, retrying...
[ 2.709085] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.709093] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.709106] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.709111] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.709124] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.709129] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.709142] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.709147] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 2.709160] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.709167] mmc0: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.709175] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 2.709188] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.709195] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.711028] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 2.711033] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.722031] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.727420] ata5.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.61, max UDMA/33
[ 2.733313] ata5.00: configured for UDMA/33
[ 2.734027] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 2.734046] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.734053] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 2.734066] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.734073] mmc1: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.735703] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-850S 1.61 PQ: 0 ANSI: 5
[ 2.736021] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 2.736038] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.738028] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.738047] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.738052] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.738217] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 2.738416] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 2.740028] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 2.740052] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.740059] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 2.740073] mmc1: req failed (CMD5): -123, retrying...
[ 2.740084] mmc1: req failed (CMD5): -123, retrying...
[ 2.740095] mmc1: req failed (CMD5): -123, retrying...
[ 2.740106] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.740114] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.740127] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.740132] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.740145] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.740151] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.740164] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.740169] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.740182] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.740188] mmc1: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.740198] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 2.740211] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.740217] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.742039] mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 2.742044] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.753019] mmc1: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.765022] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 2.765045] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.765052] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 2.765065] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.765072] mmc1: clock 300000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.767027] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 2.767045] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.769017] mmc1: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.771043] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 2.771066] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.771074] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 2.771087] mmc1: req failed (CMD5): -123, retrying...
[ 2.771098] mmc1: req failed (CMD5): -123, retrying...
[ 2.771110] mmc1: req failed (CMD5): -123, retrying...
[ 2.771121] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.771129] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.771142] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.771147] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.771160] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.771165] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.771178] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.771184] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.771197] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.771203] mmc1: clock 300000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.771213] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 2.771226] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.771233] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.773027] mmc1: mmc_rescan_try_freq: trying to init card at 200000 Hz
[ 2.773033] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.784037] mmc1: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.796033] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 2.796058] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.796065] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 2.796079] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.796085] mmc1: clock 200000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.798035] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 2.798057] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.800025] mmc1: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.802035] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 2.802057] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.802064] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 2.802077] mmc1: req failed (CMD5): -123, retrying...
[ 2.802088] mmc1: req failed (CMD5): -123, retrying...
[ 2.802099] mmc1: req failed (CMD5): -123, retrying...
[ 2.802110] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.802118] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.802131] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.802137] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.802150] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.802155] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.802168] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.802173] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.802186] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.802193] mmc1: clock 200000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.802202] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 2.802214] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.802221] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 2.804024] mmc1: mmc_rescan_try_freq: trying to init card at 128906 Hz
[ 2.804029] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 2.815023] mmc1: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.827014] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 2.827034] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.827046] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 2.827063] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 2.827074] mmc1: clock 128906Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 2.829014] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 2.829029] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 2.831007] mmc1: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.833007] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 2.833022] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 2.833033] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 2.833052] mmc1: req failed (CMD5): -123, retrying...
[ 2.833069] mmc1: req failed (CMD5): -123, retrying...
[ 2.833085] mmc1: req failed (CMD5): -123, retrying...
[ 2.833097] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 2.833110] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.833124] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.833133] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.833147] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.833157] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.833171] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.833180] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 2.833194] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 2.833204] mmc1: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 2.833214] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 2.833227] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 2.833237] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.662906] PM: Starting manual resume from disk
[ 3.691076] video LNXVIDEO:01: Restoring backlight state
[ 3.699054] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 3.699060] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.710036] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.722013] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 3.722034] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.722040] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 3.722053] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.722059] mmc0: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.724009] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 3.724023] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.726008] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.728008] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 3.728022] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.728027] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 3.728041] mmc0: req failed (CMD5): -123, retrying...
[ 3.728051] mmc0: req failed (CMD5): -123, retrying...
[ 3.728062] mmc0: req failed (CMD5): -123, retrying...
[ 3.728074] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.728080] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.728093] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.728099] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.728111] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.728116] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.728129] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.728134] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.728147] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.728153] mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.728162] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 3.728174] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.728181] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.730010] mmc0: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 3.730014] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.734224] zcache: created ephemeral tmem pool, id=0, client=65535
[ 3.734449] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 3.741091] mmc0: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.753079] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 3.753105] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.753111] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 3.753125] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.753132] mmc0: clock 300000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.755035] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 3.755060] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.757015] mmc0: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.759123] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 3.759139] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.759145] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 3.759158] mmc0: req failed (CMD5): -123, retrying...
[ 3.759169] mmc0: req failed (CMD5): -123, retrying...
[ 3.759180] mmc0: req failed (CMD5): -123, retrying...
[ 3.759191] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.759198] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.759211] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.759216] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.759229] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.759234] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.759247] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.759252] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.759265] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.759271] mmc0: clock 300000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.759280] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 3.759293] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.759299] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.761008] mmc0: mmc_rescan_try_freq: trying to init card at 200000 Hz
[ 3.761012] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.772014] mmc0: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.785040] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 3.785064] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.785071] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 3.785085] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.785092] mmc0: clock 200000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.787010] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 3.787024] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.789009] mmc0: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.791009] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 3.791023] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.791029] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 3.791042] mmc0: req failed (CMD5): -123, retrying...
[ 3.791053] mmc0: req failed (CMD5): -123, retrying...
[ 3.791064] mmc0: req failed (CMD5): -123, retrying...
[ 3.791075] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.791082] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.791095] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.791100] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.791113] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.791118] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.791131] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.791136] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.791149] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.791155] mmc0: clock 200000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.791163] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 3.791176] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.791182] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.793010] mmc0: mmc_rescan_try_freq: trying to init card at 128906 Hz
[ 3.793014] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.804050] mmc0: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.816012] mmc0: starting CMD52 arg 00000c00 flags 00000195
[ 3.816032] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.816038] mmc0: starting CMD52 arg 80000c08 flags 00000195
[ 3.816051] mmc0: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.816058] mmc0: clock 128906Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.818009] mmc0: starting CMD0 arg 00000000 flags 000000c0
[ 3.818023] mmc0: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.820009] mmc0: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.822015] mmc0: starting CMD8 arg 000001aa flags 000002f5
[ 3.822030] mmc0: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.822037] mmc0: starting CMD5 arg 00000000 flags 000002e1
[ 3.822049] mmc0: req failed (CMD5): -123, retrying...
[ 3.822061] mmc0: req failed (CMD5): -123, retrying...
[ 3.822072] mmc0: req failed (CMD5): -123, retrying...
[ 3.822083] mmc0: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.822090] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.822103] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.822108] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.822121] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.822126] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.822139] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.822144] mmc0: starting CMD55 arg 00000000 flags 000000f5
[ 3.822157] mmc0: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.822163] mmc0: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.822171] mmc0: starting CMD1 arg 00000000 flags 000000e1
[ 3.822184] mmc0: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.822190] mmc0: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.824016] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 3.824020] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.835011] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.847014] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 3.847031] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.847037] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 3.847049] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.847055] mmc1: clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.849009] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 3.849022] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.851010] mmc1: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.853009] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 3.853022] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.853027] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 3.853039] mmc1: req failed (CMD5): -123, retrying...
[ 3.853049] mmc1: req failed (CMD5): -123, retrying...
[ 3.853059] mmc1: req failed (CMD5): -123, retrying...
[ 3.853069] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.853075] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.853088] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.853092] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.853105] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.853109] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.853121] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.853126] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.853138] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.853143] mmc1: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.853152] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 3.853164] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.853169] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.855011] mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 3.855014] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.866018] mmc1: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.878013] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 3.878030] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.878035] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 3.878048] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.878053] mmc1: clock 300000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.880010] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 3.880023] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.882009] mmc1: clock 300000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.884008] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 3.884022] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.884027] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 3.884038] mmc1: req failed (CMD5): -123, retrying...
[ 3.884048] mmc1: req failed (CMD5): -123, retrying...
[ 3.884058] mmc1: req failed (CMD5): -123, retrying...
[ 3.884069] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.884074] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.884087] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.884091] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.884103] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.884108] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.884120] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.884125] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.884137] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.884143] mmc1: clock 300000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.884151] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 3.884163] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.884168] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.886009] mmc1: mmc_rescan_try_freq: trying to init card at 200000 Hz
[ 3.886013] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.897011] mmc1: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.909019] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 3.909035] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.909040] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 3.909053] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.909058] mmc1: clock 200000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.911008] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 3.911021] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.913009] mmc1: clock 200000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.915007] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 3.915020] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.915025] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 3.915037] mmc1: req failed (CMD5): -123, retrying...
[ 3.915047] mmc1: req failed (CMD5): -123, retrying...
[ 3.915056] mmc1: req failed (CMD5): -123, retrying...
[ 3.915067] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.915073] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.915085] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.915089] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.915102] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.915106] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.915119] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.915123] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.915135] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.915141] mmc1: clock 200000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.915148] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 3.915161] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.915166] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 3.917008] mmc1: mmc_rescan_try_freq: trying to init card at 128906 Hz
[ 3.917012] mmc1: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 0 timing 0
[ 3.928014] mmc1: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.940010] mmc1: starting CMD52 arg 00000c00 flags 00000195
[ 3.940025] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.940030] mmc1: starting CMD52 arg 80000c08 flags 00000195
[ 3.940043] mmc1: req done (CMD52): -123: 00000000 00000000 00000000 00000000
[ 3.940048] mmc1: clock 128906Hz busmode 2 powermode 2 cs 1 Vdd 21 width 0 timing 0
[ 3.942007] mmc1: starting CMD0 arg 00000000 flags 000000c0
[ 3.942021] mmc1: req done (CMD0): -123: 00000000 00000000 00000000 00000000
[ 3.944009] mmc1: clock 128906Hz busmode 2 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.948031] mmc1: starting CMD8 arg 000001aa flags 000002f5
[ 3.948052] mmc1: req done (CMD8): -123: 00000000 00000000 00000000 00000000
[ 3.948058] mmc1: starting CMD5 arg 00000000 flags 000002e1
[ 3.948070] mmc1: req failed (CMD5): -123, retrying...
[ 3.948081] mmc1: req failed (CMD5): -123, retrying...
[ 3.948090] mmc1: req failed (CMD5): -123, retrying...
[ 3.948101] mmc1: req done (CMD5): -123: 00000000 00000000 00000000 00000000
[ 3.948107] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.948119] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.948124] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.948136] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.948140] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.948153] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.948157] mmc1: starting CMD55 arg 00000000 flags 000000f5
[ 3.948170] mmc1: req done (CMD55): -123: 00000000 00000000 00000000 00000000
[ 3.948175] mmc1: clock 128906Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0
[ 3.948184] mmc1: starting CMD1 arg 00000000 flags 000000e1
[ 3.948197] mmc1: req done (CMD1): -123: 00000000 00000000 00000000 00000000
[ 3.948202] mmc1: clock 0Hz busmode 1 powermode 0 cs 0 Vdd 0 width 0 timing 0
[ 5.613757] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 5.695105] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; debian)
[ 5.894435] NET: Registered protocol family 10
[ 5.911209] systemd[1]: Set hostname to .
[ 6.914142] systemd[1]: [/etc/init.d/lvm2:3] Failed to add LSB Provides name lvm.service, ignoring: File exists
[ 7.818143] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. See system logs and 'systemctl status cups.socket' for details.
[ 7.818356] systemd[1]: Found ordering cycle on network-manager.service/start
[ 7.818362] systemd[1]: Walked on cycle path to atd.service/start
[ 7.818367] systemd[1]: Walked on cycle path to openvpn.service/start
[ 7.818372] systemd[1]: Walked on cycle path to network-manager.service/start
[ 7.818377] systemd[1]: Breaking ordering cycle by deleting job atd.service/start
[ 7.940129] systemd-readahead-replay[1550]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
[ 10.407849] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/display_class, it will be ignored in a future release.
[ 10.407997] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/pnp-hotplug, it will be ignored in a future release.
[ 10.408048] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
[ 10.408093] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/irda-utils, it will be ignored in a future release.
[ 10.408127] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/libpisock9, it will be ignored in a future release.
[ 10.408158] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/alsa-base, it will be ignored in a future release.
[ 10.408189] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/oss-compat, it will be ignored in a future release.
[ 10.408226] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/ndiswrapper, it will be ignored in a future release.
[ 10.408257] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/ath_pci, it will be ignored in a future release.
[ 10.408288] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/usbcore, it will be ignored in a future release.
[ 10.408318] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/i915-kms, it will be ignored in a future release.
[ 10.408351] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/alsa-base-blacklist, it will be ignored in a future release.
[ 10.408383] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/linux-sound-base_noOSS, it will be ignored in a future release.
[ 10.408413] modprobe[1570]: WARNING: All config files need .conf: /etc/modprobe.d/madwifi, it will be ignored in a future release.
[ 10.409742] modprobe[1570]: WARNING: Not loading blacklisted module battery
[ 10.429754] Marking TSC unstable due to TSC halts in idle
[ 10.429775] ACPI: acpi_idle registered with cpuidle
[ 10.431707] Switching to clocksource hpet
[ 10.493809] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 10.506080] acer_wmi: Function bitmap for Communication Device: 0x1
[ 10.506086] acer_wmi: Brightness must be controlled by generic video driver
[ 11.016083] usb 3-1: new low-speed USB device number 2 using uhci_hcd
[ 11.162604] systemd[1]: plymouth-start.service: control process exited, code=exited status=69
[ 11.169076] systemd[1]: Unit plymouth-start.service entered failed state.
[ 11.176061] usb 3-1: New USB device found, idVendor=05e3, idProduct=1205
[ 11.176067] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 11.176070] usb 3-1: Product: USB Mouse
[ 12.116598] plymouthd[1580]: plymouthd: could not log bootup: Address already in use
[ 12.925583] systemd-fsck[1564]: /dev/sda6 has been mounted 26 times without being checked, check forced.
[ 14.450158] lm-sensors[1551]: Setting sensors limits.
[ 15.028294] udevd[1596]: starting version 175
[ 15.458726] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:14
[ 15.458739] udevd[1596]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:14'
[ 15.458747] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:17
[ 15.458754] udevd[1596]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:17'
[ 15.458761] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:20
[ 15.458768] udevd[1596]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:20'
[ 15.458775] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:23
[ 15.458782] udevd[1596]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:23'
[ 15.458789] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:26
[ 15.458797] udevd[1596]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:26'
[ 15.458803] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:29
[ 15.458908] udevd[1596]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:29'
[ 15.458916] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:32
[ 15.458923] udevd[1596]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:32'
[ 15.458930] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:35
[ 15.458937] udevd[1596]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:35'
[ 15.458944] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:38
[ 15.458951] udevd[1596]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:38'
[ 15.458958] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:41
[ 15.458965] udevd[1596]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:41'
[ 15.458971] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:44
[ 15.458978] udevd[1596]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:44'
[ 15.459140] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-Argyll.rules:47
[ 15.459150] udevd[1596]: invalid rule '/etc/udev/rules.d/45-Argyll.rules:47'
[ 15.489305] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-hpdjconsole.rules:6
[ 15.489317] udevd[1596]: invalid rule '/etc/udev/rules.d/45-hpdjconsole.rules:6'
[ 15.489325] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-hpdjconsole.rules:9
[ 15.489332] udevd[1596]: invalid rule '/etc/udev/rules.d/45-hpdjconsole.rules:9'
[ 15.489340] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-hpdjconsole.rules:12
[ 15.489347] udevd[1596]: invalid rule '/etc/udev/rules.d/45-hpdjconsole.rules:12'
[ 15.489354] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/45-hpdjconsole.rules:15
[ 15.489362] udevd[1596]: invalid rule '/etc/udev/rules.d/45-hpdjconsole.rules:15'
[ 15.612048] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:14
[ 15.612086] udevd[1596]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:14'
[ 15.612117] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:17
[ 15.612144] udevd[1596]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:17'
[ 15.612174] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:20
[ 15.612200] udevd[1596]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:20'
[ 15.612229] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:23
[ 15.612255] udevd[1596]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:23'
[ 15.612283] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:26
[ 15.612310] udevd[1596]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:26'
[ 15.612338] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:29
[ 15.612364] udevd[1596]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:29'
[ 15.612393] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:32
[ 15.612419] udevd[1596]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:32'
[ 15.612447] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:35
[ 15.612474] udevd[1596]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:35'
[ 15.612502] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:38
[ 15.612528] udevd[1596]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:38'
[ 15.612557] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:41
[ 15.612583] udevd[1596]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:41'
[ 15.612611] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:44
[ 15.612637] udevd[1596]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:44'
[ 15.612665] udevd[1596]: unknown key 'SYSFS{idVendor}' in /etc/udev/rules.d/55-Argyll.rules:47
[ 15.612692] udevd[1596]: invalid rule '/etc/udev/rules.d/55-Argyll.rules:47'
[ 16.233936] hibernate[1580]: Invalidating stale software suspend images... done.
[ 16.234922] qemu-kvm[1601]: Your system does not have the CPU extensions required to use KVM. Not doing anything. ... failed!
[ 16.333054] udev-finish[1603]: touch: setting times of `/etc/udev/rules.d': Read-only file system
[ 17.093508] udevd[1596]: specified group 'nvram' unknown
[ 17.093609] udevd[1596]: specified user 'tss' unknown
[ 17.093696] udevd[1596]: specified group 'tss' unknown
[ 17.093800] udevd[1596]: specified group 'rdma' unknown
[ 17.914662] udevd[1662]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 17.967805] lvm2[1604]: Setting up LVM Volume Groups /dev/mapper/control: open failed: No such device
[ 17.967816] lvm2[1604]: Failure to communicate with kernel device-mapper driver.
[ 17.967823] lvm2[1604]: Check that device-mapper is available in the kernel.
[ 17.985442] hdparm[1606]: Setting parameters of disc: (none).
[ 18.018292] udevd[1704]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 18.018518] udevd[1705]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 18.022775] udevd[1706]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 18.025548] udevd[1707]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 18.099153] ACPI: AC Adapter [ACAD] (on-line)
[ 18.110559] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 18.136873] lvm2[1604]: Reading all physical volumes. This may take a while...
[ 18.346701] lvm2[1604]: No volume groups found
[ 18.359603] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 18.377635] lvm2[1604]: /dev/mapper/control: open failed: No such device
[ 18.377646] lvm2[1604]: Failure to communicate with kernel device-mapper driver.
[ 18.377653] lvm2[1604]: Check that device-mapper is available in the kernel.
[ 18.540587] cfg80211: Calling CRDA to update world regulatory domain
[ 18.541924] udevd[1810]: failed to execute '/lib/udev/ifplugd.agent' 'ifplugd.agent': No such file or directory
[ 18.703113] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input7
[ 18.740188] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input8
[ 18.923505] udevd[1855]: failed to execute '/lib/udev/ifplugd.agent' 'ifplugd.agent': No such file or directory
[ 19.093814] intel_rng: FWH not detected
[ 19.097175] iTCO_vendor_support: vendor-support=0
[ 19.097737] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 19.097842] iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x1060)
[ 19.099494] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 19.196287] input: USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input9
[ 19.196564] generic-usb 0003:05E3:1205.0001: input: USB HID v1.10 Mouse [USB Mouse ] on usb-0000:00:1d.1-1/input0
[ 19.196997] usbcore: registered new interface driver usbhid
[ 19.197020] usbhid: USB HID core driver
[ 19.201497] udevd[1875]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 19.221132] udevd[1886]: failed to execute '/lib/udev/check-ptp-camera' 'check-ptp-camera 06/01/01': No such file or directory
[ 19.409599] udevd[1630]: kernel-provided name 'sr0' and NAME= 'scd0' disagree, please use SYMLINK+= or change the kernel to provide the proper name
[ 19.433839] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 19.433885] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 20.727818] ath5k 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 20.727834] ath5k 0000:05:00.0: setting latency timer to 64
[ 20.727881] ath5k 0000:05:00.0: registered as 'phy0'
[ 21.236449] ath: EEPROM regdomain: 0x65
[ 21.236454] ath: EEPROM indicates we should expect a direct regpair map
[ 21.236458] ath: Country alpha2 being used: 00
[ 21.236460] ath: Regpair used: 0x65
[ 21.236801] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 21.237730] Registered led device: ath5k-phy0::rx
[ 21.237787] Registered led device: ath5k-phy0::tx
[ 21.237801] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70)
[ 21.259214] udevd[1947]: failed to execute '/lib/udev/ifplugd.agent' 'ifplugd.agent': No such file or directory
[ 21.543779] modprobe[1926]: FATAL: Error running install command for snd_hda_codec_realtek
[ 21.553559] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 21.556662] modprobe[1867]: FATAL: Error running install command for snd_hda_intel
[ 22.438190] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. See system logs and 'systemctl status cups.socket' for details.
[ 22.438935] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. See system logs and 'systemctl status cups.socket' for details.
[ 22.439699] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. See system logs and 'systemctl status cups.socket' for details.
[ 22.440492] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. See system logs and 'systemctl status cups.socket' for details.
[ 25.240476] zcache: created persistent tmem pool, id=1, client=65535
[ 25.240483] Adding 971896k swap on /dev/sda5. Priority:0 extents:1 across:971896k FS
[ 27.178136] lvm2[1604]: No volume groups found
[ 27.179150] lvm2[1580]: .
[ 30.727498] laptop-mode[2168]: Laptop mode
[ 30.728932] laptop-mode[2169]: disabled, not active
[ 32.013938] laptop-mode[2191]: Laptop mode
[ 32.015885] laptop-mode[2192]: disabled, not active
[ 127.888734] systemd-readahead-collect[1549]: Failed to open pack file: Read-only file system
[ 127.907031] systemd[1]: systemd-readahead-collect.service: main process exited, code=exited, status=1
[ 471.611184] systemd-fsck[1564]: /dev/sda6: 1018623/9846784 files (2.0% non-contiguous), 18160787/19683633 blocks
[ 471.872165] zcache: created ephemeral tmem pool, id=2, client=65535
[ 471.872183] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr
[ 471.964084] kjournald starting. Commit interval 5 seconds
[ 471.964122] EXT3-fs (sda4): warning: maximal mount count reached, running e2fsck is recommended
[ 471.964439] EXT3-fs (sda4): using internal journal
[ 471.964446] zcache: created ephemeral tmem pool, id=3, client=65535
[ 471.964451] EXT3-fs (sda4): mounted filesystem with writeback data mode
[ 472.064054] ifupdown-clean[2218]: Cleaning up ifupdown....
[ 472.104740] ifupdown[2247]: Setting up networking....
[ 472.143566] console-screen.sh[2227]: Setting console screen modes and fonts.
[ 472.252285] pcmciautils[2226]: No PCMCIA bridge module specified ... failed!
[ 472.265778] console-screen.sh[2227]: setterm: $TERM is not defined.
[ 472.347227] networking[2268]: Configuring network interfaces...done.
[ 472.491695] /usr/sbin/cron[2308]: (CRON) INFO (pidfile fd = 3)
[ 472.501732] irqbalance[2302]: Starting SMP IRQ Balancer: irqbalance.
[ 472.511794] cron[2303]: Starting periodic command scheduler: crond.
[ 472.512735] /usr/sbin/cron[2316]: (CRON) STARTUP (fork ok)
[ 472.514241] /usr/sbin/cron[2316]: (CRON) INFO (Running @reboot jobs)
[ 472.692217] timidity[2306]: Timidity is not yet configured.
[ 472.692228] timidity[2306]: Enable Alsa Sequencer first by editing /etc/default/timidity.
[ 472.726168] stop-plymouth[2333]: Splash control client
[ 472.726180] stop-plymouth[2333]: USAGE: plymouth [OPTION...] [COMMAND [OPTION...]...]
[ 472.726187] stop-plymouth[2333]: Options:
[ 472.726193] stop-plymouth[2333]: --help This help message
[ 472.726201] stop-plymouth[2333]: --debug Enable verbose debug logging
[ 472.726208] stop-plymouth[2333]: --get-splash-plugin-path Get directory where splash plugins are installed
[ 472.726216] stop-plymouth[2333]: --newroot= Tell boot daemon that new root filesystem is mounted
[ 472.726223] stop-plymouth[2333]: --quit Tell boot daemon to quit
[ 472.726230] stop-plymouth[2333]: --ping Check of boot daemon is running
[ 472.726238] stop-plymouth[2333]: --has-active-vt Check if boot daemon has an active vt
[ 472.726245] stop-plymouth[2333]: --sysinit Tell boot daemon root filesystem is mounted read-write
[ 472.726351] stop-plymouth[2333]: --show-splash Show splash screen
[ 472.726359] stop-plymouth[2333]: --hide-splash Hide splash screen
[ 472.726366] stop-plymouth[2333]: --ask-for-password Ask user for password
[ 472.726373] stop-plymouth[2333]: --ignore-keystroke= Remove sensitivity to a keystroke
[ 472.726381] stop-plymouth[2333]: --update= Tell boot daemon an update about boot progress
[ 472.726388] stop-plymouth[2333]: --details Tell boot daemon there were errors during boot
[ 472.726396] stop-plymouth[2333]: --wait Wait for boot daemon to quit
[ 472.726402] stop-plymouth[2333]: Available commands:
[ 472.726409] stop-plymouth[2333]: update Tell daemon about boot status changes
[ 472.726416] stop-plymouth[2333]: update-root-fs Tell daemon about root filesystem changes
[ 472.726423] stop-plymouth[2333]: show-splash Tell daemon to show splash screen
[ 472.726520] stop-plymouth[2333]: hide-splash Tell daemon to hide splash screen
[ 472.726528] stop-plymouth[2333]: ask-for-password Ask user for password
[ 472.726535] stop-plymouth[2333]: ask-question Ask user a question
[ 472.726542] stop-plymouth[2333]: display-message Display a message
[ 472.726549] stop-plymouth[2333]: hide-message Hide a message
[ 472.726555] stop-plymouth[2333]: watch-keystroke Become sensitive to a keystroke
[ 472.726562] stop-plymouth[2333]: ignore-keystroke Remove sensitivity to a keystroke
[ 472.726569] stop-plymouth[2333]: pause-progress Pause boot progress bar
[ 472.726576] stop-plymouth[2333]: unpause-progress Unpause boot progress bar
[ 472.726583] stop-plymouth[2333]: report-error Tell boot daemon there were errors during boot
[ 472.726590] stop-plymouth[2333]: deactivate Tell boot daemon to deactivate
[ 472.726940] stop-plymouth[2333]: reactivate Tell boot daemon to reactivate
[ 472.726949] stop-plymouth[2333]: quit Tell boot daemon to quit
[ 472.726957] stop-plymouth[2333]: Options for update command:
[ 472.726964] stop-plymouth[2333]: --status= Tell daemon the current boot status
[ 472.726971] stop-plymouth[2333]: Options for update-root-fs command:
[ 472.726978] stop-plymouth[2333]: --new-root-dir= Root filesystem is about to change
[ 472.726985] stop-plymouth[2333]: --read-write Root filesystem is no longer read-only
[ 472.726992] stop-plymouth[2333]: Options for ask-for-password command:
[ 472.727017] stop-plymouth[2333]: --command= Command to send password to via standard input
[ 472.727027] stop-plymouth[2333]: --prompt= Message to display when asking for password
[ 472.727034] stop-plymouth[2333]: --number-of-tries= Number of times to ask before giving up (requires --command)
[ 472.727950] stop-plymouth[2333]: --dont-pause-progress Don't pause boot progress bar while asking
[ 472.727962] stop-plymouth[2333]: Options for ask-question command:
[ 472.727969] stop-plymouth[2333]: --command= Command to send the answer to via standard input
[ 472.727977] stop-plymouth[2333]: --prompt= Message to display when asking the question
[ 472.727984] stop-plymouth[2333]: --dont-pause-progress Don't pause boot progress bar while asking
[ 472.727991] stop-plymouth[2333]: Options for display-message command:
[ 472.727998] stop-plymouth[2333]: --text= The message text
[ 472.728038] stop-plymouth[2333]: Options for hide-message command:
[ 472.728045] stop-plymouth[2333]: --text= The message text
[ 472.728053] stop-plymouth[2333]: Options for watch-keystroke command:
[ 472.728060] stop-plymouth[2333]: --command= Command to send keystroke to via standard input
[ 472.728118] stop-plymouth[2333]: --keys= Keys to become sensitive to
[ 472.728126] stop-plymouth[2333]: Options for ignore-keystroke command:
[ 472.728133] stop-plymouth[2333]: --keys= Keys to remove sensitivity to
[ 472.728140] stop-plymouth[2333]: Options for quit command:
[ 472.728146] stop-plymouth[2333]: --retain-splash Don't explicitly hide boot splash on exit
[ 472.751072] anacron[2369]: Anacron 2.3 started on 2012-01-06
[ 472.751139] anacron[2314]: Starting anac(h)ronistic cron: anacron.
[ 472.751428] acpi-support[2321]: Checking battery state...done.
[ 472.761384] anacron[2369]: Normal exit (0 jobs run)
[ 472.763849] lpd[2319]: Starting printer spooler: lpd.
[ 472.764553] lpd[2371]: restarted
[ 472.765139] acct[2304]: Starting process accounting: Turning on process accounting, file set to '/var/log/kernel_pacct'.
[ 472.801934] udevd[1695]: kernel-provided name 'uinput' and NAME= 'input/uinput' disagree, please use SYMLINK+= or change the kernel to provide the proper name
[ 472.812183] systemd[1]: Cannot add dependency job for unit cups.socket, ignoring: Unit cups.socket failed to load: No such file or directory. See system logs and 'systemctl status cups.socket' for details.
[ 473.367238] Disabling lock debugging due to kernel taint
[ 473.388696] vboxdrv: Found 2 processor cores.
[ 473.388929] vboxdrv: fAsync=0 offMin=0x4d0 offMax=0x25e6
[ 473.389025] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 473.389028] vboxdrv: Successfully loaded version 4.1.6_Debian (interface 0x00190000).
[ 473.721000] vboxpci: pci-stub module not available, cannot detach PCI devices
[ 473.721065] vboxpci: IOMMU not found (not registered)
[ 474.203921] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 476.093073] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 476.105407] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 476.140676] uhci_hcd 0000:00:1d.0: PCI INT A disabled
[ 476.141226] uhci_hcd 0000:00:1d.2: PCI INT C disabled
[ 476.141531] uhci_hcd 0000:00:1d.3: PCI INT D disabled
[ 476.141817] ehci_hcd 0000:00:1d.7: PCI INT A disabled
[ 476.141877] ehci_hcd 0000:00:1d.7: PME# enabled
[ 476.450105] ehci_hcd 0000:00:1d.7: BAR 0: set to [mem 0xd0644000-0xd06443ff] (PCI address [0xd0644000-0xd06443ff])
[ 476.450137] ehci_hcd 0000:00:1d.7: restoring config space at offset 0xf (was 0x100, writing 0x105)
[ 476.450174] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102)
[ 476.450227] ehci_hcd 0000:00:1d.7: PME# disabled
[ 476.450249] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 476.450263] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 476.493993] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 476.494040] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 476.531315] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 476.531333] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 476.566080] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 476.566098] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 483.341051] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 497.068327] fuse init (API version 7.17)
[ 517.974638] python[3286]: segfault at 8 ip 080df3a4 sp bfc4bb40 error 4 in python2.7[8048000+225000]
[ 619.925319] wlan0: authenticate with 84:c9:b2:82:80:43 (try 1)
[ 619.930963] wlan0: authenticated
[ 619.937707] wlan0: associate with 84:c9:b2:82:80:43 (try 1)
[ 619.951233] wlan0: RX AssocResp from 84:c9:b2:82:80:43 (capab=0x411 status=0 aid=1)
[ 619.951239] wlan0: associated
[ 619.951773] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 631.890051] wlan0: no IPv6 routers present